Zanussi ZR 230/2 TN Instructieboekje - Pagina 10

Blader online of download pdf Instructieboekje voor {categorie_naam} Zanussi ZR 230/2 TN. Zanussi ZR 230/2 TN 10 pagina's.

Drill the door to fix the runner (A) as shown in figure.

open the appliance and kitchen unit doors to about

90°; position block (B) on the inside of the unit door

as shown in Fig.; then secure it to the unit door,

positioning the screws at the far left-hand end of the

elongated holes in the block ; pressing lightly, slide

the block towards the left (the elongated holes are

provided for this purpose) until the device engages

on the guide, so allowing simultaneous opening of

both doors. After having fitted the bottom block (and

engaging it on the bottom guide) fully tighten the

securing screws on both blocks. Fit the block covers

The doors can be opened using the sliding system

previously illustrated, or one of the two doors can be

opened by fitting the small handle supplied as an

accessory.

Important

As indicated in the section relating to changing the

opening direction of the doors, if you wish to perform

this operation when the appliance is in use, it is

essential to check and confirm it with the kitchen unit

supplier since it also involves changing the opening

direction of the unit door, and consequently

positioning of the appliance.

D117

D118

D122

D029