Zanussi ZRA40102WA Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZRA40102WA. Zanussi ZRA40102WA 16 pagina's.

Pagina afdrukken

WARNING!

This appliance must be earthed.

The manufacturer declines any

liability should these safety

measures not be observed.

The wires in the mains lead are coloured in

accordance with the following code:

• A - green and yellow: Earth

• C - brown: Live

• D - blue: Neutral

As the colours of the wires in the mains lead of

this appliance may not correspond with the

coloured markings identifying the terminals in

your plug, proceed as follows:

1. Connect the wire coloured green and

yellow to the terminal marked either with the

letter "E" or by the earth symbol

coloured green and yellow.

2. Connect the wire coloured blue to the

terminal either marked with the letter "N" or

coloured black.

3. Connect the wire coloured brown to the

terminal either marked with the "L" or

coloured red.

4. Check that no cut, or stray strands of wire is

present and the cord clamp (E) is secure

over the outer sheath.

Make sure the electricity supply voltage is

the same as that indicated on the appliance

rating plate.

5. Switch on the appliance.

The appliance is supplied with a 13 amp fuse

(B). In the event of having to change the fuse in

www.zanussi.com

the plug supplied, a 13 amp ASTA approved

(BS 1362) fuse must be used.

WARNING!

A cut off plug inserted into a 13 amp

socket is a serious safety (shock)

hazard. Ensure that it is disposed of

safely.

Levelling

Accurate levelling prevents the vibration and

noise of the appliance during operation. To

adjust the height of the appliance loosen or

tighten the two adjustable front feet.

Rear spacers

You can find the two spacers in the bag with

documentation.

1. Release the screw.

2. Engage the spacer below the screw.

3. Turn the spacer to the right position.

4. Tighten again the screws.