Zanussi ZOD35712X Gebruikershandleiding - Pagina 18

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZOD35712X. Zanussi ZOD35712X 24 pagina's. Oven zanussi zod35712b/ zod35712x
Ook voor Zanussi ZOD35712X: Gebruikershandleiding (24 pagina's)

Pagina afdrukken

Stainless steel or aluminium appliances

Clean the oven door with a wet

sponge only. Dry it with a soft cloth.

Do not use steel wool, acids or

abrasive materials as they can

damage the oven surface. Clean the

oven control panel with the same

precautions.

Removing the shelf supports

To clean the oven, remove the shelf supports.

Pull the front of the

shelf support away

from the side wall.

Install the shelf supports in the opposite

sequence.

Catalytic cleaning

CAUTION!

Do not clean the catalytic surface

with oven sprays, abrasive cleaning

agents, soap or other cleaning

agents. This will damage the

catalytic surface.

Spots or discolouration of the

catalytic surface have no effect on

catalytic properties.

WARNING!

Keep children away when you clean

the oven at a high temperature. The

oven surface becomes very hot and

there is a risk of burns.

CAUTION!

Always turn the oven light on while

using the catalytic cleaning (if

applicable).

Pull the rear end of

the shelf support

away from the side

wall and remove it.

Before activating the catalytic

cleaning remove all the accessories

from the oven.

The walls with a catalytic coating are self-

cleaning. They absorb fat which collects on the

walls while the appliance operates.

To support the self-cleaning procedure, heat

the empty oven on a regular basis.

1. Clean the oven floor with warm water and

washing up liquid, then dry it.

2. Set the function

3. Set the temperature to 250ºC and let oven

operate for 1 hour.

4. When the appliance is cool, clean it with a

soft and moist sponge.

Removing and installing the door

You can remove the door and the internal glass

panels to clean it. The number of glass panels is

different for different models.

WARNING!

Be careful when you remove the

door from the appliance. The door is

heavy.

1. Open the door fully.

2. Fully lift up the clamping levers (A) on the

two door hinges.

3. Close the door until it is at an angle of

approximately 45°.

if applicable. If not, set