Zanussi ZOP38903XD Gebruikershandleiding - Pagina 22

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZOP38903XD. Zanussi ZOP38903XD 28 pagina's. Product manaul
Ook voor Zanussi ZOP38903XD: Gebruikershandleiding (24 pagina's)

Pagina afdrukken

1. Oven Functions

The back lamp

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

Troubleshooting

WARNING!

Refer to Safety chapters.

What to do if...

Problem

You cannot activate or operate

the oven.

The oven does not heat up.

The lamp does not operate.

The oven does not heat up. The

fan does not operate. The display

shows

The display shows an error code

that is not in this table.

3. Replace the lamp with a suitable 300 °C

4. Install the glass cover.

Possible cause

The oven is not connected to an

electrical supply or it is connec-

ted incorrectly.

The oven is deactivated.

The clock is not set.

The necessary settings are not

set.

The automatic switch-off is acti-

vated.

The Child Lock is on.

The fuse is blown.

The lamp is defective.

The demo mode is activated.

There is an electrical fault.

heat-resistant lamp.

Check if the oven is correctly

connected to the electrical sup-

ply (refer to the connection dia-

gram if available).

Activate the oven.

Set the clock.

Make sure that the settings are

correct.

Refer to "Automatic switch-off".

Refer to "Using the Child Lock".

Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

Replace the lamp.

1. Deactivate the oven.

2. Press and hold

appliance activates and re-

turn to the standby mode.

3. Press and hold

the same time until the

acoustic signal sounds again

and the indicator goes out.

•

Deactivate the oven with the

house fuse or the safety

switch in the fuse box and ac-

tivate it again.

•

If the display shows the error

code again, contact the Cus-

tomer Care Department.

Remedy

until the

and