Zanussi FE1200 Gebruikershandleiding - Pagina 18

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi FE1200. Zanussi FE1200 25 pagina's. Washing machine fe 1200

Operating sequence

Before washing your first load of laundry, we

recommend that you run a cotton cycle at 60°C, with

the machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked

3. Measure out the additives

If required, pour fabric softener into the compartment

marked

without exceeding the «MAX» mark.

4. Switch the machine on

To switch the machine on, press the ON/OFF button

: the mains-on light comes on.

The display will show three blinking dashes or a

blinking zero.

5. Select the desired programme/

fabric

Press the FABRIC button

to select the desired programme/fabric. The relevant

light will light up.

The lights relevant to the phases that form the

programme will light up.

The display will show the duration of the selected

programme, calculated on the basis of the maximum

load for each type of fabric. The light of the START/

PAUSE button will start flashing.

If the load of laundry to be washed is small, at the

beginning of the cycle the display will still indicate the

duration relevant to the maximum load. The duration

value will be gradually adjusted during the execution

of the cycle.

repeatedly, in order