Zanussi FJ 1033 Gebruikershandleiding - Pagina 26

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi FJ 1033. Zanussi FJ 1033 37 pagina's. Electrolux washing machine instruction booklet
Ook voor Zanussi FJ 1033: Instructieboekje (36 pagina's)

Pagina afdrukken

■ PROBLEM

• CAUSE

► SOLUTION

■ THE MACHINE LEAKS OR

OVERFLOWS

# Too much washing powder

# Unsuitable washing powder

# The inlet hose ring is loose

# The detergent dispenser

drawer or recess are clogged

# The end of the drain hose is

not securely positioned

► Reduce the quantities of

washing powder

► Only use washing powder

suitable for automatic machines

► Tighten the ring (see page 8)

► Clean the drawer and recess

(see page 23)

► Position the drain hose correctly

■ THE MACHINE VIBRATES

OR IS NOISY

• The internal packing has not

been removed

• The machine is not level

• The machine is in contact

with the wall or furniture

• Washing

load

badly

distributed

• The machine is overloaded

► Remove internal packing (see

P- 7)

► Adjust the feet (see page 10)

► Move the machine; it should

rest freely on its feet

► Remember to shake out large

items (e.g.

sheets) when

► Run the draining programme

(N),

reduce the load and

continue

■ THE DOOR DOES NOT OPEN

9 The safety device has locked

it (door pilot light on)

# Water in the wash tub

Wait 1 - 2 minutes after the

^ end of the programme before

opening the door (door pilot

light off)

► Drain the water by running the

draining programme (N)

If, after the above checks,

there is still a fault, call your

nearest Zanussi Service Force

Centre, whose address and

telephone number can be

found on the following pages.

Please make sure you give

the model and serial number

of the appliance. This infor¬

mation can be found on the

rating plate (see picture), or

on the guarantee certificate.

Original spare parts can be

purchased from Zanussi

Service Force Centres.

In-guarantee

customers

should ensure that the above

checks have been made as the

engineer will make a charge if

the fault is not a mechanical or

electrical breakdown.

Please note that proof of

purchase is required for any

in-guarantee service calls.