Zanussi FL 908 Instructieboekje - Pagina 15

Blader online of download pdf Instructieboekje voor {categorie_naam} Zanussi FL 908. Zanussi FL 908 23 pagina's. Front-loading washing machine

Operating sequence

Before the first wash we recommend that you pour 2

litres of water into the main wash compartment

of the detergent drawer in order to activate the ECO

valve. Then run the cotton cycle 60°E, with the

machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked

3. Measure out the additive

If required, pour fabric softener into the compartment

marked

, without exceeding the «MAX» mark.

4. Select the desired programme

Turn the programme selector dial to the desired

position.

The light corresponding to the max spin speed for

the selected programme illuminates and the light of

the START/PAUSE button starts to flash.

5. Reduce eventually the spin speed or

select WET ANTI-ARRUGAS (Rinse

Hold) option

Press the button repeatedly to reduce the spin speed

or select the RINSE HOLD option.

The relevant light illuminates.

FL 708

When selecting RINSE HOLD option the water of the

last rinse is not emptied out, to prevent the fabrics

from creasing.

6. Select the required option(s)

The light corresponding to the depressed button

illuminates.