Zanussi ZWS 58801 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZWS 58801. Zanussi ZWS 58801 21 pagina's.

Pagina afdrukken

BEFORE FIRST USE

1. Put 2 litre of water in the detergent

compartment for washing phase.

This activates the drain system.

2. Put a small quantity of detergent in the

compartment for washing phase.

DAILY USE

LOADING THE LAUNDRY

Open the water tap. Connect the mains plug to the

mains socket.

1. Pull the door handle to open the appliance

door.

2. Put the laundry in the drum, one item at a time.

3. Shake the items before you put them in the

appliance.

Make sure not to put too much laundry in the drum.

Refer to max. loads indicated in "Programme chart".

4. Close the door.

USING DETERGENT AND ADDITIVES

DETERGENT COMPARTMENTS

Detergent compartment for pre-

wash phase.

Detergent compartment for

washing phase.

CAUTION!

Make sure

that no laun-

dry stays be-

tween the

seal and the

door. There

is a risk of

water leak-

age or dam-

age to the

laundry.

1. Measure out the de-

tergent and the fabric

conditioner.

2. Put the detergent

and the fabric condi-

tioner into the com-

partments.

3. Carefully close the

detergent drawer.

3. Set and start a programme for cotton at the

highest temperature without laundry.

This removes all possible dirt from the drum and the

tub.

Compartment for liquid additives

(fabric conditioner, starch).

SETTING A PROGRAMME

1. Turn the programme knob clockwise or

counterclockwise to switch the appliance on

and set the programme:

The indicator of Start/Pause button flashes.

2. If necessary, change the spin speed or add

available options.

When you activate an option, the indicator of the

set option comes on.

If you turn the programme knob to

another programme when the

appliance is working, the red indicator

of Start/Pause button will blink to

indicate a wrong selection.

SETTING THE TEMPERATURE

Turn clockwise this knob to select the more

convenient to your laundry washing temperature.

If you set

, the appliance will perform a washing

with cold water.

STARTING THE PROGRAMME

Press the button Start/Pause.

The corresponding green indicator stops flashing.

The only indicator corresponding to the running

phase stays on.

The appliance starts operating and the door locks.

The drain pump can operate for a

short time at the beginning of the

washing cycle.

CANCELLING A RUNNING PROGRAMME

1. Turn the programme knob to position

cancel the programme and to deactivate the

appliance.