Zanussi ZWY 71054SE Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZWY 71054SE. Zanussi ZWY 71054SE 21 pagina's.

Pagina afdrukken

FROST PRECAUTIONS

If the appliance is installed in an area where the

temperature can be less than 0 °C, remove the

remaining water from the inlet hose and the drain

pump.

Do this procedure also when you want

to do the emergency drain.

1. Close the water tap and disconnect the water

inlet hose.

2. Disconnect the drain hose from a sink or

spigot.

3. Put the ends of the drain and inlet hose in a

container. Let the water flow out of the hoses.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

INTRODUCTION

The start of the appliance does not occur or it

stops during operation.

First try to find a solution to the problem (refer to

the table). If not, contact the Authorised Service

Centre.

POSSIBLE FAILURES

Problem

The programme does not

start.

4. Set the Drain programme and let it operate until

5. Turn the programme knob to Stop to

6. Disconnect the appliance.

The red indicator of button

•

Make sure that the mains plug is connected to the mains socket.

•

Make sure that the appliance lid and drum doors are closed proper-

ly.

•

Make sure that there is not a damaged fuse in the fuse box.

•

Make sure that the Start/Pause has been pressed.

•

If the delay start is set, cancel the setting or wait for the end of

countdown.

•

Deactivate the Child Lock function if it is on (if available).

the end of the cycle.

disconnect the appliance from the power

supply.

WARNING! Make sure that the

temperature is more than 0°C before

you use the appliance again. The

manufacturer is not responsible for

damages caused by low temperatures.

WARNING! Deactivate the appliance

before you do the checks.

Possible solution

flashes.