Zanussi DW 920 Instructieboekje - Pagina 11

Blader online of download pdf Instructieboekje voor {categorie_naam} Zanussi DW 920. Zanussi DW 920 32 pagina's. Dishwasher
Ook voor Zanussi DW 920: Instructieboekje (32 pagina's), Instructieboekje (32 pagina's)

Pagina afdrukken
Zanussi DW 920 Instructieboekje
USING YOUR MACHINE
The Water Softener
Water contains varying amounts of lime and mineral
salts depending on the area in which you live; these
are deposited on the dishes leaving white marks.
The higher the content of these salts, the harder your
water will be. The «hardness» level is measured on 3
equivalent scales; French Degrees, Parts per Million
(PPM) or Clarke Degrees.
Contact your local Water Authority to find the exact
water hardness level for your area.
The dishwasher is equipped with a softener which
uses special dishwasher salt to provide lime-free
(softened) water. The softener can treat water hard¬
ness up to 90 french degrees via 5 adjustment levels.
Find on the table below the level corresponding to the
hardness of your water and the required adjustments;
WATER HARDNESS
(if in doubt contact your local
Water Authority)
WATER
SOFTENING
WATER HARDNESS
ADJUSTMENT POSITION
(refer to text below)
Level of
water hardness
PPM
Clarke
Degrees
French
Degrees
Use
of salt
On the water
softener
On the
machine
1
0-140
0-14
NO
NO
NO
2
150-390
11-27
15-39
YES
NO
NO
3
400-500
28-35
40-50
YES
YES
NO
4
510-700
36-49
51-70
YES
NO
YES
5
50-63
71-90
YES
YES
YES
The water softener is factory set level 2 as this suits
most users.
If your water is «level 1» it is already soft and there¬
fore there is no need to use salt. In this case do not
take into account the salt light (10).
Water softener adjustment (levels 3 and 5)
If your water is level 3 or 5, proceed as follows:
— slide out the lower basket and unscrew the cap of
the salt container:
— turn the two position selector from position — to
position
+
with the aid of a knife or a screwdriver.
Adjustment on the machine (levels 4 and 5)
If your water is level 4 or 5, open the door and drill
membrane A on the upper left-hand corner of the
machine.
Important
Salt MUST be used regularly from level 2 upward.
11