Zanussi DWS 697 Instructieboekje - Pagina 19

Blader online of download pdf Instructieboekje voor {categorie_naam} Zanussi DWS 697. Zanussi DWS 697 22 pagina's. Dishwasher dws 697

Pagina afdrukken

Installation instructions

Remove all packaging before positioning the

machine.

If possible, position the machine next to a water tap

and a drain.

Water supply connections

This dishwasher may be fed with either hot (max. 60°)

or cold water.

Nevertheless we advise you a cold water supply.

A hot water supply is not always efficient with very

soiled crockery as it shortens the washing

programmes a lot.

The water pressure must be within the limits given in

the technical specifications.

Your local Water Authority will advise you on the

average mains pressure in your area.

The dishwasher features fill and drain hoses which

can be turned either to the left or the right to suit the

installation.

The locknut must be correctly fitted to avoid water

leaks.

Avoid bends or kinks in the hose which could prevent

or slow down the water supply.

If the machine is connected to new pipes or pipes

which have not been used for a long time, you should

run the water for a few minutes before connecting the

inlet hose. This will prevent deposits of sand or rust

clogging the inlet hose filter.

For making the connection itself, the coupling nut fitted

to the machine's supply hose is designed to screw

onto either a 3/4 inch gas thread spout, or to a

purpose made quick-coupling tap such as the Press-

block.

The water supply hose is fitted with a safety device,

which prevents water from entering the machine

should the inner hose split, due to wear.

The problem is signalled by a red indicator which

appears in the window (B -

If this happens, close the water tap and have the hose

replaced.

The retaining ring (A -

as to avoid water leaks.

Note:

Only for water supply hoses with Lock-fast safety

device to prevent inadvertent loosening.

To detach the hose press yellow lever (C -

the retaining ring anticlockwise

) must be properly fitted so

) and turn

Any electrical work required to install

this appliance should be carried out by a

qualified electrician or competent

person.

Any plumbing work required to install

this appliance should be carried out by a

qualified plumber or competent person.

CA13

COL10en