Directed CHRYSLER5 Installatiehandleiding - Pagina 15

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Directed CHRYSLER5. Directed CHRYSLER5 20 pagina's.

Pagina afdrukken

Active Ground When Running (Status)

LED

Description

Ground When Running (Status) command

received.

Flashes green

Ignition ON command received.

Flashes red &

orange

Start ON command received.

Flashes green

quickly

PTS shutdown error.

Flashes red x 10

CAN bus incorrectly detected.

Flashes red x 21

Commands

LED

Description

LOCK command received.

Flashes orange x 1

UNLOCK command received.

Flashes orange x 2

TRUNK command received.

Flashes orange x 3

AUX1 command received.

Flashes orange x 4

AUX2 command received.

Flashes orange x 5

AUX3 command received.

Flashes orange x 6

Shutdown codes

LED

Description

Takeover successful.

Flashes green x 1

Runsafe was not disabled.

Flashes red x 1

Brake was not detected.

Flashes red x 2

Smart key was not detected.

Flashes red x 3

Speed was detected.

Flashes red x 4

Analog error codes

LED

Description

DEI feature error.

Flashes red, green

& orange

Troubleshooting

The module has initialized the remote start sequence.

The module has received the Ignition ON command and is processing the remote start sequence.

The module has received the Start ON command and is processing the remote start sequence.

The PTS output from the module was not activated due to safety protection.

Verify the CAN1 and CAN2 connections. Refer to "Installation (wiring diagrams & vehicle wiring

reference charts)" on page 8 to check the connections.

Troubleshooting

If the bypass module fails to flash, it did not receive the signal.

Commands can come from RF or D2D.

Troubleshooting

Normal operation.

No UNLOCK command was received prior to opening the door, or the 45 second timer expired

in takeover mode.

The brakes were not detected, which prevents the system from shutting down the vehicle.

The smart key was not detected, which prevents the system from shutting down the vehicle.

The vehicle was detected as moving, which prevents the system from shutting it down.

Troubleshooting

A feature config file mismatch was detected. Please contact Technical Support.

Directed Digital Solutions CHRYSLER5