Zanussi ZDT36001FA Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZDT36001FA. Zanussi ZDT36001FA 21 pagina's.
Pagina afdrukken
ADDING MULTI-TABLETS
•
Adjust the water softener to the lowest level.
SETTING AND STARTING A PROGRAMME
The AUTO OFF function
This function decreases energy consumption by
deactivating automatically the appliance when it is
not operating.
The function comes into operation:
•
5 minutes after the completion of the
programme.
•
After 5 minutes if the programme has not
started.
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
appliance. Make sure that the appliance is in
programme selection mode.
3. Press one of the programme buttons until the
display shows the number of the desired
programme. The display shows the programme
duration after some seconds.
4. Set the applicable options.
5. Close the appliance door to start the
programme.
Option Delay
1. Set a programme.
2. Press
until the display shows the delay time
you want to set (1-24h).
The delay time flashes in the display.
3. Close the appliance door. The countdown
starts to decrease by 1 hour.
When the countdown is complete the programme
starts.
Opening the door while the appliance
operates
Opening the door while a programme is running
stops the appliance. It may affect the energy
1
2
consumption and the programme duration. After
closing the door, the appliance continues from the
point of interruption.
If the door is opened during the drying
phase, before AirDry automatically
opens it, the programme ends after 30
seconds.
If the door is closed after it is opened
automatically by AirDry in the drying
phase, the programme ends after 3
minutes.
Do not try to close the appliance door
within 2 minutes after AirDry
automatically opens it, as this may
cause damage to the appliance.
End of the programme
When the programme is completed the display
shows 0:00 and the end indicator is on.
All buttons are inactive except for the on/off button.
1. Press the on/off button or wait for the AUTO
OFF function to automatically deactivate the
appliance.
If you open the door before the activation of
AUTO OFF, the appliance is automatically
deactivated.
2. Close the water tap.
11