Zanussi ZDTS 300 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZDTS 300. Zanussi ZDTS 300 28 pagina's.
Pagina afdrukken
4. Press the button corresponding to the re-
quired programme (see "Washing pro-
grammes" chart).
When a programme has been selected the
corresponding light will illuminate.
5. Close the dishwasher door, the pro-
gramme starts automatically.
Setting and starting the
programme with "delay start"
1. After having selected the washing pro-
gramme, press the delay start button until
the light corresponding to the chosen hours
flashes (3h, 6h, 9h).
2. Close the dishwasher door, the countdown
starts automatically.
3. The countdown will decrease with steps of
3 hours.
4. The opening of the door will interrupt the
countdown. Close the door; the countdown
will continue from the point at which it was
interrupted.
5. Once the delay start has elapsed the pro-
gramme will start automatically.
Cancelling the delay start
To cancel a delay start in progress you have to
reset the dishwasher.
Press simultaneously and keep pressed func-
tion buttons B and C until all programme button
light are illuminated.
Cancelling a delay start involves also the can-
celling of the washing programme set. In this
case you have to set the washing programme
again.
CAUTION!
Interrupt or cancel a washing programme in
progress ONLY if it's absolutely necessary.
Attention! Hot steam may escape when the
door is opened. Open the door carefully.
Interrupt a washing programme in pro-
gress:
• Open the dishwasher door; the programme
will stop. Close the door; the programme will
start from the point at which it was interrup-
ted.
Cancel a washing programme in progress
• Open the dishwasher door; press
simultaneously and keep pressed function
buttons B and C until all programme button
is illuminated. The washing programme has
been cancelled. .
• If a new washing programme is to be selec-
ted, check that there is detergent in the
detergent dispenser.
Cancelling the "delay start"
• To cancel a delay start in progress, open the
door and press the delay start button, the
corresponding light turns off.
• close the door, the set washing programme
will start automatically.
End of the washing programme
• The dishwasher will automatically stop and
an audible signal informs you of the end of
the washing programme.
• Open the dishwasher door.
• The end of programme indicator light is il-
luminated.
• The indicator light of the programme just
ended will remain on.
• Switch off the dishwasher by pressing the
On/Off button.
7