Zanussi ZDTS102 Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZDTS102. Zanussi ZDTS102 20 pagina's.

Pagina afdrukken

Fault code and malfunction

• continuous flash of the light of the

running programme

• intermittent audible signal

• 1 flash of the end indicator light

The appliance does not fill with water

• continuous flash of the light of the

running programme

• intermittent audible signal

• 2 flashes of the end indicator light

The appliance will not drain the water.

• continuous flash of the light of the

running programme

• intermittent audible signal

• 3 flashes of the end indicator light

Anti-flood device operates

The programme does not start

After the check, switch on the appliance. The pro-

gramme continues from the point of interruption. If the

malfunction shows again, contact your Service Force

Centre.

These data are necessary to help you quickly and cor-

rectly:

• Model (Mod.)

The dishes are not clean

• The water tap is blocked or furred with limescale.

Clean the water tap.

• The water tap is closed.

Open the water tap.

• The filter in the water inlet hose is blocked.

Clean the filter.

• The connection of the water inlet hose is not correct. The hose

can be kinked or squashed.

Make sure that the connection is correct.

• There is a blockage in the sink spigot.

Clean the sink spigot.

• The connection of the water drain hose is not correct. The hose

can be kinked or squashed.

Make sure that the connection is correct.

• Close the water tap and contact your local Service Force Centre.

• The appliance door is not closed.

Close the door.

• Mains plug is not connected in.

Put in the mains.

• The fuse has blown out in the household fuse box.

Replace the fuse.

The cleaning results are not satisfactory

• The selected washing programme is not applicable for the type of load

and soil.

• The baskets are loaded incorrectly so that water cannot reach all surfaces.

• Spray arms do not turn freely because of incorrect arrangement of the

load.

• The filters are dirty or not correctly installed.

• The quantity of detergent is too little or missing.

Possible cause and solution

• Product number (PNC)

• Serial number (S.N.)

For these data, refer to the rating plate.

Write the necessary data here:

Model description : ..........

Product number : ..........

Serial number : ..........