Zanussi ZDTS401 Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZDTS401. Zanussi ZDTS401 20 pagina's.

Pagina afdrukken

What to do if...

The appliance does not start or stops during operation.

If there is a fault, first try to find a solution to the problem

yourself. If you cannot find a solution to the problem

Fault code and malfunction

• intermittent audible signal

• digital display shows

The dishwasher does not fill with water

• intermittent audible signal

• digital display shows

The dishwasher will not drain

• intermittent audible signal

• digital display shows

The anti-flood device operates

The programme does not start

After the check, switch on the appliance. The pro-

gramme continues from the point of interruption. If the

malfunction shows again, contact your Service Force

Centre.

These data are necessary to help you quickly and cor-

rectly:

• Model (Mod.)

yourself, contact your dealer or the Service Force Cen-

tre.

Possible cause and solution

• The water tap is blocked or furred with limescale.

Clean the water tap.

• The water tap is closed.

Open the water tap.

• The filter in the water inlet hose is blocked.

Clean the filter.

• The connection of the water inlet hose is not correct. The hose

can be kinked or squashed.

Make sure that the connection is correct.

• There is a blockage in the sink spigot.

Clean the sink spigot.

• The connection of the water drain hose is not correct. The hose

can be kinked or squashed.

Make sure that the connection is correct.

• Close the water tap and contact your local Service Force Centre.

• The appliance door is not closed.

Close the door.

• Mains plug is not connected in.

Put in the mains.

• The fuse has blown out in the household fuse box.

Replace the fuse.

• Delay start is set.

Cancel the delay start to start the programme immediately.

• Product number (PNC)

• Serial number (S.N.)

For these data, refer to the rating plate.

Write the necessary data here:

Model description : ..........

Product number : ..........

Serial number : ..........