Zanussi ZEM6740FBA Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZEM6740FBA. Zanussi ZEM6740FBA 20 pagina's.

Pagina afdrukken

Hea

Use to:

set-

ting

6 - 7

Gentle fry: escalope, veal cor-

don bleu, cutlets, rissoles,

sausages, liver, roux, eggs,

pancakes, doughnuts

7 - 8

Heavy fry, hash browns, loin

steaks, steaks

Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips

Boil large quantities of water. Power function is activated.

Care and cleaning

Clean the appliance after each use.

Always use cookware with clean bottom.

Scratches or dark stains on the glass-ce-

ramic cause no effect on how the appli-

ance operates.

To remove the dirt:

1. – Remove immediately: melted plastic,

plastic foil, and food with sugar. If not,

the dirt can cause damage to the appli-

ance. Use a special scraper for the

glass . Put the scraper on the glass sur-

Troubleshooting

Problem

You cannot activate the appliance

or operate it.

An acoustic signal sounds and

the appliance deactivates.

An acoustic signal sounds when

the appliance is deactivated.

The appliance deactivates.

www.zanussi.com

Time

as necessary

5 - 15 min

2. Clean the appliance with a moist cloth

3. At the end rub the appliance dry with

Possible

You touched 2 or more sensor

fields at the same time.

The STOP+GO function oper-

ates.

There is water or fat stains on the

control panel.

You put something on one or

more sensor fields.

You put something on the sensor

field

Hints

Turn halfway through

face at an acute angle and move the

blade on the surface .

– Remove after the appliance is suf-

ficiently cool: limescale rings , water

rings, fat stains, shiny metallic discolor-

ations. Use a special cleaning agent for

glass ceramic or stainless steel.

and some detergent.

a clean cloth.

Activate the appliance again and

set the heat setting in less than

10 seconds.

Touch only one sensor field.

Refer to the chapter "Daily Use".

Clean the control panel.

Remove the object from the sen-

sor fields.

Remove the object from the sen-

sor field.

Nominal pow-

er consump-

tion

31 – 45 %

45 – 64 %

100 %

Remedy