Zanussi ZGF 646 CT Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZGF 646 CT. Zanussi ZGF 646 CT 44 pagina's.

Building in

A = Auxiliary burner

SR= Semi-rapid burner

R = Rapid burner

This hob can be inserted in a built-in

kitchen unit whose depth is between

550 and 600 mm. The hobs dimensions

are shown in Fig. 4.

The edge of the cut out must have a

minimum distance from the rear wall of

55 mm.

If there are side walls, or sides of the

furniture unit near the hob, the cut out

edges must have a minimum distance of

100 mm.

Hanging forniture units or hoods

must be placed at 650 mm. minimum

from the hob.

Fitting the lid

We recommend the lid hinge block

are fitted before installing the hob

into the worktop.

To install the lid onto the hob, proceed

as follows:

a. a. a. a. a. Remove the right and left hand grid

blocks fitted to the back of the hob, by

unscrewing the relevant screws (Fig.

5).

Fig. 4

Fig. 5