Zanussi ZGF 692 C Instructieboekje - Pagina 21

Blader online of download pdf Instructieboekje voor {categorie_naam} Zanussi ZGF 692 C. Zanussi ZGF 692 C 32 pagina's. Zanussi instruction booklet gas hob zgf 682, zgf 692
Ook voor Zanussi ZGF 692 C: Instructieboekje (16 pagina's)

Pagina afdrukken

Electrical Connections

Any electrical work required to install this hob should be

carried out by a qualified electrician or competent person,

in accordance with the current regulations.

THIS HOB MUST BE EARTHED.

Electrical Requirements

Any permanent electrical installation must comply with the latest I.E.E.

Regulations and local Electricity Board regulations. For your own safety

this should be undertaken by a qualified electrician, e.g. your local Electricity

Board, or a contractor who is on the roll of the National Inspection Council

for Electrical Installation Contracting (NICEIC).

The manufacturer declines any liability should these safety

measures not be observed.

This hob is designed to be connected to a 230 V 50 Hz AC electrical supply.

Before switching on, make sure the electricity supply voltage is the same

as that indicated on the hob rating plate. The rating plate is located on the

bottom of the hob. A copy is attached on

the back cover of this book.

The hob is supplied with a 3 core flexible

supply cord incorporating a 3 amp plug

fitted. In the event of having to change the

fuse, a 3 amp ASTA approved (BS 1362)

fuse must be used.

Should the plug need to be replaced for

any reason, the wires in the mains lead are

coloured in accordance with the following

code:

Green and Yellow

Blue

Brown

! ! ! ! !

1) Connect the green and yellow (earth) wire to the terminal in the

plug which is marked with the letter 'E' or the earth symbol

or coloured green and yellow.

2) Connect the blue (neutral) wire to the terminal in the plug which

is marked with the letter 'N' or coloured black.

- Earth

- Neutral

- Live

FO 0390