Zanussi ZGG66424 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZGG66424. Zanussi ZGG66424 16 pagina's. Gas hob
Ook voor Zanussi ZGG66424: Gebruikershandleiding (16 pagina's), Gebruikershandleiding (16 pagina's), Gebruikershandleiding (21 pagina's)

Pagina afdrukken

Warning! Do not use abrasive cleaners, steel wool

pads or acids. They can cause damage to the

appliance.

Scratches or dark stains on the surface have no ef-

fect on how the appliance operates.

• You can remove the pan supports to easily clean the

hob.

• To clean the enamelled parts, cap and crown, wash

them with warm soapy water and dry them carefully be-

fore you put them back.

• Wash stainless steel parts with water, and then dry

them with a soft cloth.

• The pan supports are not dishwasher proof. They must

be washed by hand.

• When you wash the pan supports by hand, take care

when you dry them as the enamelling process occa-

sionally leaves rough edges. If necessary, remove

stubborn stains using a paste cleaner.

• Make sure you position the pan supports correctly after

cleaning.

• To make the burners work correctly, make sure that the

arms of the pan supports are in the centre of the burn-

er.

What to do if...

Problem

There is no spark when lighting the

gas

• Be very careful when you replace the pan supports to

After cleaning, dry the appliance with a soft cloth.

The stainless steel can become tarnished if it is too much

heated. Refer to this you must not cook with potstones,

earthenware pans or cast iron plates. Do not use alumini-

um foil to prevent damage the top during operation.

Removing the dirt:

Cleaning of the spark plug

This feature is obtained through a ceramic ignition candle

with a metal electrode. Keep these components well clean

to prevent difficult lighting and check that the burner

crown holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force Centre to

check the conditions of the gas supply pipe and the pres-

sure adjuster, if fitted.

Possible cause

• There is no electrical supply

• Burner cap and crown are placed

uneven

prevent the hob top from damage.

– Remove immediately: melting plastic, plastic foil,

and food containing sugar.

– Stop the appliance and let it cool down before

you clean: limescale rings, water rings, fat stains,

shiny metallic discolorations. Use a special

cleaner applicable for surface of hob.

Clean the appliance with a damp cloth and some de-

tergent.

At the end rub the appliance dry with a clean cloth.

• Make sure that the unit is connec-

ted and the electrical supply is

switched on.

• Control the fuse. If the fuse is re-

leased more than one time, refer

to a qualified electrician.

• Make sure that the burner cap and

crown are in correct positions.

Remedy