Zanussi ZGO63414 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZGO63414. Zanussi ZGO63414 16 pagina's. 58 cm, 4 zones
Ook voor Zanussi ZGO63414: Gebruikershandleiding (40 pagina's), Gebruikershandleiding (48 pagina's), Handmatig (44 pagina's), Gebruikershandleiding (40 pagina's)

Pagina afdrukken

• Make sure you position the pan supports cor-

rectly after cleaning.

• To make the burners work correctly, make

sure that the arms of the pan supports are in

the centre of the burner.

• Be very careful when you replace the

pan supports to prevent the hob top

from damage.

After cleaning, dry the appliance with a soft

cloth.

Removing the dirt:

1. – Remove immediately: melting plastic,

plastic foil, and food containing sugar.

– Stop the appliance and let it cool

down before you clean: limescale rings,

water rings, fat stains, shiny metallic dis-

colorations. Use a special cleaner appli-

cable for surface of hob.

2. Clean the appliance with a damp cloth and

some detergent.

3. At the end rub the appliance dry with a

clean cloth.

Troubleshooting

Problem

There is no spark when lighting the

gas

The flame is blow out immediately

after ignition

The gas ring burns unevenly

If there is a fault, first try to find a solution to the

problem yourself. If you cannot find a solution to

the problem yourself, speak your dealer or the

local Service Force Centre.

the glass or between the rims of the burners

and the frame (if applicable).

Also, do not let hard or sharp objects fall onto

the glass or hit the edge of the hob.

during the cooking.

Cleaning of the spark plug

This feature is obtained through a ceramic igni-

tion candle with a metal electrode. Keep these

components well clean to prevent difficult light-

ing and check that the burner crown holes are

not obstructed.

Periodic maintenance

Periodically speak your local Service Force

Centre to check the conditions of the gas sup-

ply pipe and the pressure adjuster, if fitted.

Possible cause

• There is no electrical supply

• Burner cap and crown are

placed uneven

• Thermocouple is not heated suf-

ficient

• Burner crown is blocked with

food residues

registered engineer, the visit from the customer

Warning! Do not use knives, scrapers or

similar instruments to clean the surface of

Warning! Do not slide cookware over the

glass because it could scratch the surface.

Warning! Do not put the aluminium foil on

the hob top to keep the surface clean

• Make sure that the unit is con-

nected and the electrical supply

is switched on.

• Control the fuse. If the fuse is

released more than one time, re-

fer to a qualified electrician.

• Make sure that the burner cap

and crown are in correct posi-

tions.

• After lightning the flame, keep

the knob pushed for equal or

less than 10 seconds.

• Make sure that the injector is

not blocked and the burner

crown is clear of food particles.

If you operated the appliance incorrectly, or

the installation was not carried out by a

Remedy