Zanussi ZGX65424XA Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZGX65424XA. Zanussi ZGX65424XA 20 pagina's. Hob

Pagina afdrukken

A) Green and Yellow

B) 3 amp fuse

C) Brown

D) Cord clamp

E) Blue

The wires in the cord are coloured as follows:

Green and yellow

Blue

Brown

Replacement of the connection cable

1. Connect the green and yellow (earth) wire

to the terminal which is marked with the let-

ter 'E', or the earth symbol

green and yellow.

2. Connect the blue (neutral) wire to the ter-

minal which is marked with the letter 'N' or

coloured blue.

3. Connect the brown (live) wire to the termi-

nal which is marked with the letter 'L'. It

must always be connected to the network

phase.

There must be no cut or stray strands of wire

present. The cord clamp must be correctly at-

tached to the outer sheath.

To replace the connection cable use only

H05V2V2-F T90 or equivalent type. Make

sure that the cable section is applicable to the

- Earth

- Neutral

- Live

, or coloured

voltage load and the working temperature. The

yellow/green earth wire (B) must be approxi-

mately 2 cm longer than the live and neutral wire

(A).

Warning! A cut off plug inserted into a 13

amp socket is a serious safety (shock)

hazard. Ensure that the cut off plug is disposed

of safely.

Important! The replacement of electric cable

must be carried out exclusively by the service

force centre or by personnel with similar

competencies, in accordance with the current

regulations.

Building In

min. 600 mm

min. 100 mm

min. 55 mm

30 mm

10 mm

3 mm

min. 650 mm

560 mm

11 mm