Zanussi ZKT 641 H Handleiding voor installatie en gebruik - Pagina 21
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Zanussi ZKT 641 H. Zanussi ZKT 641 H 32 pagina's. Zanussi installation and operating instructions ceramic hob zkt 641 h
Ook voor Zanussi ZKT 641 H: Handleiding voor installatie en gebruik (28 pagina's)
Pagina afdrukken
Installation Instructions
Safety instructions
Warning! This must be read!
The laws, ordinances, directives and standards in force in the country of use
are to be followed (safety regulations, proper recycling in accordance with
the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be observed.
Anti-shock protection must be provided by the installation, for example
drawers may only be installed with a protective floor directly underneath the
appliance.
The cut surfaces of the worktop are to be protected against moisture using
a suitable sealant.
The sealant seals the appliance to the work top with no gap.
Avoid installing the appliance next to doors and under windows. Otherwise
hot cookware may be knocked off the rings when doors and windows are
opened.
Risk of injury from electrical current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of voltage.
• Follow connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection by installing correctly.
• The appliance must be connected to the electrical supply by a qualified
electrician.
Risk of injury from electrical current.
• Loose and inappropriate plug and socket connections can make the ter-
minal overheat.
• Have the clamping connections correctly installed by a qualified electri-
cian.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase connection, the appropriate
mains cable of type H05BB-F Tmax 90°C (or higher) must be used.
• If this appliance's mains cable is damaged, it must be replaced by a spe-
cial cable (type H05BB-F Tmax 90°C; or higher). Please contact your local
Service Force Center for further advice.
21