Zanussi ZFC620WAP Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi ZFC620WAP. Zanussi ZFC620WAP 12 pagina's. Chest freezer
Ook voor Zanussi ZFC620WAP: Gebruikershandleiding (8 pagina's)

Pagina afdrukken

Problem

Customer Service

If your appliance is still not working properly af-

ter making the above checks, contact the near-

est service centre.

To obtain fast service, it is essential that when

you apply for it you specify the model and serial

number of your appliance which can be found

either on the guarantee certificate or on the rat-

ing plate located on the external right side of the

appliance.

Replacing the lamp

1. Disconnect the mains plug from the mains

socket.

Installation

Positioning

Warning! If you are discarding an old

appliance that has a lock or catch on the

lid, you must ensure that it is made unusable to

prevent young children being trapped inside.

Important! The appliance shall have the plug

accessible after installation.

This appliance can be installed in a dry, well

ventilated indoor (garage or cellar), but for opti-

mum performance install this appliance at a lo-

cation where the ambient temperature corre-

sponds to the climate class indicated on the rat-

ing plate of the appliance:

www.zanussi.com

Possible cause

There is no voltage in the mains

socket (try to connect another ap-

pliance into it).

Call an electrician.

2. Replace the lamp with one of the same

power and specifically designed for house-

hold appliances. (the maximum power is

shown on the lamp cover)

3. Connect the mains plug to the mains sock-

et.

4. Open the lid. Make sure that the lamp

comes on.

Climate

Ambient temperature

class

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Electrical Connection

Caution! Any electrical work required to

install this appliance should be carried out

by a qualified electrician or competent person.

Warning! This appliance must be earthed.

The manufacturer declines any liability

should these safety measures not be observed.

Solution