Zanussi ZIC 429 Instructieboekje - Pagina 8

Blader online of download pdf Instructieboekje voor {categorie_naam} Zanussi ZIC 429. Zanussi ZIC 429 14 pagina's.

Remove the little plates and make the holes with a

diam. of 2 mm. Replace the little plates over the

runners and screw in the screws provided (3.5x16

mm).

For the alignment of the kitchen unit door, if

necessary, use the clearance size of the slotted holes.

At the end of the procedure, check that the doors of

the appliance and the kitchen unit open properly.

In case of side ﬁxing of the appliance, it will be

sufﬁcient to loose the screws ﬁxing the bracket (G)

and to position it as shown in Fig. 11.

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply.

Voltage can vary by 6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

The technical data is indicated in the rating plate on the left side inside the appliance.

TECHNICAL SPECIFICATION

PR35

D397

Fig. 10

Fig. 11