Zanussi ZVF 240 R Instructieboekje - Pagina 6

Blader online of download pdf Instructieboekje voor {categorie_naam} Zanussi ZVF 240 R. Zanussi ZVF 240 R 12 pagina's.

Pagina afdrukken

Changing the opening

direction of the door

Unplug the freezer before performing the following

operations:

Remove the ventilation grill (D-Fig. 2).

Unscrew the bottom hinge (E-Fig. 2).

Remove the door from the upper pivot (A-Fig. 3).

Remove the pivot and the washer (A+B-Fig. 3) from

the upper hinge (C), then mount these on the opposite

side.

Re-assemble the door.

Screw down the bottom hinge (E-Fig. 2) on the

opposite side by using the screws previously

removed.

Detach the plug (F-Fig. 2) from the ventilation grill

(D). To do this, press it in the direction of the arrow.

Introduce the plug (F), which is delivered with the

appliance, into the hole left free on the opposite side.

Re-assemble the ventilation grill.

Reverse the direction of the handle.

Unscrew the handle. Reﬁt it on the opposite side after

having pierced the plugs with a punch. Cover the

holes left open with the plugs contained in the

documentation pack.

If, after having reversed the door, it is not in line with

the unit, the top hinge can be adjusted.

To do this, use a 10 mm spanner as shown in Fig. 3;

slacken the nut, align the door by pushing it to the left

or right, then re-tighten the nut.

Attention

After completion of the door reversibility operation,

verify that the door gasket is adherent to the cabinet.

If the ambient temperature is cold (i.e. in Winter), the

gasket may not ﬁt perfectly to the cabinet. In that

case, wait for the natural ﬁtting of the gasket or

accelerate this process by heating up the part involved

with a normal hairdrier.

Reversing the quick-freezing

compartment door

Unscrew the closing prong support (H).

Unscrew the two hinges (I) and remove the door.

Turn the closing prong support and ﬁx it to the other

side of the quick-freezing compartment.

Reverse the door and the hinges and mount them on

the other side of the compartment.

Check to see that the door closes correctly.

(Fig. 5)

D640

D427

D162

D276

Fig. 2

Fig. 3

Fig. 4

Fig. 5