Zanussi ZHT659 Installatie- en gebruikshandleiding - Pagina 11
Blader online of download pdf Installatie- en gebruikshandleiding voor {categorie_naam} Zanussi ZHT659. Zanussi ZHT659 11 pagina's. Cooker hood zh758; zh759; zh7633; zh7933; zf601; zf602; zht559; zht6011; zht6021; zht659
Pagina afdrukken
3.2-Pay attention to safety regulations 1. 7 and 1. 8 .
4-MAINTENANCE AND CLEANING
Regular maintenance and cleaning will ensure good performance and reliability, while
exten-ding the working-life of the hood. Special attention should be reserved to the grease
filter and to the charcoal filter (recycling mode).
4.1-Grease filter
This retains the solid grease particles and can be supplied in different types. lt is fitted
onto the reverse side of the metal grille panel.
Maintenance of the grease filter varies according to the used type.
a - Whatever type of filters used, the filter is easily removed from the grille by pushing the
metal wire clips to one side and removing.
b - Thin synthetic filter (1 mm thick). It should not be washed and should be replaced
every two months. If the filter is provided with a saturation indicator, replace when:
b.1 - The violet colour of the dots, which are visible through the metal grille, is spread over
the whole surface of the filter.
b.2 - The red colour of the stripes, which is not visible through the metal grille when the
filter is clean, becomes visible from the outside of the metal grille.
c - Multi-layer metal filter. It should be washed once a month in hot water using mild
detergent or liquid soap. It can be washed in a dish-washer. It should not be bent and
should be left to drain dry.
WARNING: An excess of grease in the filter not only would affect the performance of the
hood, but it is also a possible fire risk. We strongly recommend therefore to clean and
replace filters in accordance with the manufacturer instructions.
4.2 -Metal grease filter
1 -Cleaning
The metal grease filter should be cleaned every two months with normal usage and can
be washed in a dishwasher or by hand using a mild detergent or liquid soap.
2 -Replacement
Remove the filters,one at a time,paying attention to support them with one hand while
pulling the stainless steel bolts backwards.Refit the filters paying attention to keep the
bolts facing downwards.
4.3-Charcoal filter
The charcoal filter is a chemical filter to be used only when the hood is in the recycling
position. To replace the charcoal filter, open the grille and remove the thumb screw through
the centre of the charcoal filter. If the filter is of the interlocking type, turn the filter
anticlockwise. Replace by revers-ing the operation. For a good performance replace the
charcoal filter on average every three months.
4.4-Worktop illumination
If a lamp fails to function at any time, open the metal grille panel and check that the lamp
is fully screwed into the holder. When changing the lamp, an identical replacement must
be fitted to ensure a safe working of the hood.
4.5 - Cleaning
The metal work should be cleaned regularly, at least once a month, using mild household
cleaner and polish. Never use abrasives.
For all operations from point 4.1 to point 4.4 and in particular for point 4.3, pay special
attention to the safety regulation 1. 9 .
11
GB