Zanussi 943006226 Gebruikershandleiding - Pagina 18

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Zanussi 943006226. Zanussi 943006226 28 pagina's.

Pagina afdrukken

Stainless steel or aluminium appliances

Clean the oven door with a damp

cloth or sponge only. Dry it with a

soft cloth.

Do not use steel wool, acids or

abrasive materials as they can

damage the oven surface. Clean the

oven control panel with the same

precautions.

Catalytic cleaning

CAUTION!

Do not clean the catalytic surface

with oven sprays, abrasive cleaning

agents, soap or other cleaning

agents. This will damage the

catalytic surface.

Spots or discolouration of the

catalytic surface have no effect on

catalytic properties.

WARNING!

Keep children away when you clean

the oven at a high temperature. The

oven surface becomes very hot and

there is a risk of burns.

Before you turn on the catalytic

cleaning remove all the accessories

from the oven.

The cavity with a catalytic coating is self-

cleaning. It absorbs fat.

To support the self-cleaning procedure, heat

the empty oven on a regular basis.

1. Clean the oven floor with warm water and

washing up liquid, then dry it.

2. Set the oven temperature to 250 °C and let

the oven operate for 1 hour.

3. When the oven is cool, clean it with a soft

and wet sponge.

Cleaning the oven door

The oven door has two panels of glass installed

one behind the other. To make the cleaning

easier remove the oven door.

WARNING!

The oven door can close if you try to

remove the internal panel of glass

when the door is still assembled.

Do not lose the screws.

1. Open the door fully and hold the two door

hinges.

2. Lift and turn the levers on the two hinges.

3. Close the oven door to the first opening

position (halfway). Then pull forward and

remove the door from its seat.

4. Put the door on a soft cloth on a stable

surface.

5. Use a screwdriver to remove 2 screws from

bottom edge of door.