Zanussi MC 5634 Instructies voor gebruik en verzorging - Pagina 14
Blader online of download pdf Instructies voor gebruik en verzorging voor {categorie_naam} Zanussi MC 5634. Zanussi MC 5634 28 pagina's. Mixed fuel cookers
Ook voor Zanussi MC 5634: Gebruiksaanwijzing en onderhoudshandleiding (28 pagina's), Gebruiksaanwijzing (28 pagina's)
Pagina afdrukken
Totally Automatic Cooking
This enables you to turn the oven on and
off at pre-set times. Place the food to be
cooked into the oven.
Check that dial D shows symbol «0». If it
is not, do so by turning knob B clockwise.
Pull knob B outwards and turn it
clockwise to set on dial E the required
cooking start time.
Press and turn knob B clockwise to se on
dial D the required cooking duration.
Turn the oven and thermostat control
knobs to the required settings.
On completion of the programmed
cooking cycle the «0» symbol will be
centred on dial D, in this position the
electricity supply to the oven is switched
off thereby turning off the oven.
Important
To stop an automatic programme turn the
knob B clockwise to centre on dial D the
symbol «0».
To finish the cooking manually, turn knob
B clockwise to centre on dial D the hand
symbol \IIIl .
Example of programmer setting with
automatic operation of the oven
Cooking start time: 17.00 hours.
Cooking duration: 2 hours.
Place the food into the oven.
Check that symbol «0» is shown on dial
D. Pull knob B outwards and turn it
clockwise to set on dial E the cooking
start time (5=17.00 hours).
Press and turn knob B clockwise and set
cooking duration on dial D (2 hours).
Turn the oven and thermostat control
knobs to the required settings.
After this the oven will automatically
turn on at 17.00 hours and then turn off
at 19.00 hours after completion of the
cooking programme.
Minute Minder
The programmer will operate as a minute
minder provided no automatic cooking
has been programmed.
To operate the minute minder turn knob
A clockwise, setting on dial C the
required duration of cooking time
(maximum of 60 minutes). The sound
alarm will indicate when the pre-set time
has elapsed. To turn off the alarm turn
knob A clockwise to centre on dial C the
crossed bell symbol ( 0 ).
14