Zanussi ZCG5000 Instructieboekje - Pagina 26

Blader online of download pdf Instructieboekje voor {categorie_naam} Zanussi ZCG5000. Zanussi ZCG5000 48 pagina's. Gas cooker
Ook voor Zanussi ZCG5000: Gebruikershandleiding (40 pagina's)

Pagina afdrukken

The hotplate

Clean the hotplate top using a mild abrasive such as 'Cif'. Take care not to

damage the spark electrodes. If the spark electrodes are damaged the

burners will not light.

You can remove the pan supports, burner caps and burner crowns to

clean them. Again take care not to damage the spark electrodes.

If any food spills do occur during cooking you can place the pan on

another burner to finish cooking. Then you can remove the dirty parts and

clean them before the spill 'burns on'.

You can wash the removable parts in very hot soapy water. You may use

mild abrasives. Make sure that the electrode and the hole and slots in the

crown are not blocked with food or cleaning materials.

Clean the burner crowns by soaking them in very hot soapy water.

You can remove any stubborn stains by scouring with a soap filled pad

such as 'Brillo'. If you look after the burner crowns in this way they will stay

reasonably clean. However the surface will dull with time.

Aluminium based saucepans can leave shiny metal marks on the pan

supports. Clean the pan supports regularly to remove the marks using a

mild abrasive like 'Cif' with a soft scourer. For more

stubborn marks you can use a soap filled pad such

as 'Brillo'. After cleaning the appliance parts, dry

them thoroughly before you put them back.

When replacing hotplate burner parts

1. Crown to body (Do not try to force the

crown on to the body).

Make sure that the hole in the crown is

centrally over the electrode. Check that

the two longer location pegs sit in the

slots in the body. When the crown is in

the position let it fall freely on to the body.

Check that the crown can be moved

slightly from side to side.

2. Cap to crown.

Place cap centrally on the top of crown

(enamel side up). Move sideways and

front to back to check the cap is properly

fitted.

3. Check for ignition

If a burner will not light then you need to

check the crown and cap positions.

Z C G 5 0 0 0 / 5 0 0 1