Clarke CHAMP 265 Handleiding voor bediening en onderhoud - Pagina 12
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke CHAMP 265. Clarke CHAMP 265 12 pagina's.
Pagina afdrukken
Assembly
WARNING!
Before assembling and using the air compressor, make sure that you have
read and understood all of the safety instructions.
Installation
Take care when lifting the compressor from the packaging.
CAUTION! Do not lift the compressor from the gauge of fittings assembly. Get
assistance if necessary. This unit weighs 19 kg.
After removing the compressor from its packaging, check the integrity of the
unit, making sure it has not been damaged in transit.
Positioning the air compressor
This compressor should be positioned on a
stable, flat surface (or one with a maximum
inclination of 15
O
). See figure 1, and ensure
that it is completely stable.
Do not cover or box in the compressor.
Always position it at least 50cm from any
obstacle or wall
Make sure the compressor has good all
Figure 1
15
max
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3
12
Assembly
Moving the air compressor
Before moving the compressor, switch off and disconnect it from the mains power
supply.
• Always use the trolley handle.
• Do not lift by (or put strain on) fittings, valves or hoses.
• Take care when moving the compressor to avoid damaging the valves or
fittings.
The compressor is heavy, get assistance when lifting and moving this compressor
to avoid personal injury.
Preparing for Use
Before connecting your compressor to the mains supply,
Check the Oil
1.
Lift the dipstick out of the oil reservoir. See figure 2.
2.
Ensure the oil level is between the min and max marks on the dipstick. See
figure 3.
• If needed top up the reservoir with Clarke SAE 40 compressor oil, available
from your Clarke dealer.
0
Figure 2
Figure 3
13