Clarke PED14A50 Handleiding voor bediening en onderhoud - Pagina 9
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke PED14A50. Clarke PED14A50 17 pagina's. 3hp direct drive compressor
Pagina afdrukken
REMOVING TOOLS FROM THE AIR HOSE
WARNING: ALWAYS SET THE PRESSURE REGULATOR TO ZERO BEFORE
ATTEMPTING TO REMOVE OR REPLACE A TOOL.
1. Press the red On/Off switch down
to the OFF position to stop the
compressor.
2. Set the pressure regulator to its
lowest setting, i.e. fully
anticlockwise (if fitted).•
3. Trigger the equipment (spraygun,
air tool etc), to release air from the
air hose before disconnecting the
hose from the machine.
RESET BUTTON
This compressor is equipped with a
thermal overload device, which
operates as a safety device to
protect the motor.
When the motor overheats for any
reason, the overload cutout
automatically cuts the power thereby
preventing damage to the motor.
Wait around 5 minutes for the motor
to cool and press the reset button.
If you restart the compressor and the overload cutout activates again, switch
off the compressor, remove the plug from the mains and have your
compressor checked by a qualified service agent.
9