Alecto DBX-90 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alecto DBX-90. Alecto DBX-90 8 pagina's. 1.8ghz dect baby monitor, talk back, nightlight with lullaby

Pagina afdrukken

Parent Unit

Basic Steps to Install

1. Connect the output plug of the mains adapter to the DC socket at

the back of the baby unit and the mains adapter to the wall mains

supply.

2. Plug the charger adaptor for the Parent Unit into the mains power

socket.

3. Remove the battery door on the Parent Unit by lifting the battery

door outward.

4. Insert 2 x AA rechargeable batteries, observing their polarities, into

the battery compartment on the Parent Unit.

5. Replace the battery door on the Parent Unit.

6. Place the Parent unit on the charger to charge. The red Led on the

charger will turn on

7. Let the batteries charge for a full 16 hours before using for first time

installation.

Note: The baby unit also works on battery power. You can insert 4 x

1.5V AA Alkaline batteries in the battery compartment on the

Baby Unit. In case of power interruption, the baby unit continues

to work on battery power. If the baby unit is on battery power,

Battery is displayed, together with the battery icon and current

temperature, on idle mode.

CAUTION

Use only the mains adaptor and charger adaptor supplied with

baby monitor. Incorrect adaptor type can cause damage to the

unit.

Input: 230 VAC 50 Hz

Output: 6 VDC 500 mA

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE.

Never use non-rechargeable batteries; use

recommended type supplied with this product. NiMH batteries

must be disposed of in accordance with applicable waste disposal

regulations.