Clarke Ranger 25A Bedienings- en onderhoudshandleiding - Pagina 6

Blader online of download pdf Bedienings- en onderhoudshandleiding voor {categorie_naam} Clarke Ranger 25A. Clarke Ranger 25A 15 pagina's. Oil free

ELECTRICAL CONNECTIONS

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through

an approved 13 amp BS 1363 plug, or a suitably fused isolator switch.

WARNING! THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in the mains lead are coloured in accordance with the

following code:

Green & Yellow

As the colours of the flexible lead of this appliance may not correspond with

the coloured markings identifying terminals in your plug proceed as follows:

Connect GREEN & YELLOW cord to terminal marked with a letter "E" or

Earth symbol "

" or coloured GREEN or GREEN & YELLOW.

Connect BROWN cord to terminal marked with a letter "L" or coloured RED.

Connect BLUE cord to terminal marked with a letter "N" or coloured BLACK.

If this appliance is fitted with a plug which is moulded onto the electric cable

(i.e. non-rewireable) please note:

The plug must be thrown away if it is cut from the electric cable.

There is a danger of electric shock if it is subsequently inserted into a socket

outlet.

Never use the plug without the fuse cover fitted.

Should you wish to replace a detachable fuse carrier, ensure that the

correct replacement is used (as indicated by marking or colour code).

Replacement fuse covers can be obtained from your local dealer or most

electrical stockists.

FUSE RATING

The fuse in the plug must be replaced with one of the same rating (13 amps)

and this replacement must be ASTA approved to BS1362.

We strongly recommend that this machine is connected to the mains supply via

a Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs

yourself.

Earth

Blue

Neutral

Brown

Live