Clarke Ranger 25A Bedienings- en onderhoudshandleiding - Pagina 9
Blader online of download pdf Bedienings- en onderhoudshandleiding voor {categorie_naam} Clarke Ranger 25A. Clarke Ranger 25A 15 pagina's. Oil free
Pagina afdrukken
TROUBLE SHOOTING
With considerate use, your CLARKE Air Compressor should provide you
with a long and trouble free period of operation. Routine checks should
be made on both the electrical supply as well as on all the compressed
air lines and connections. If any fault appears, the reason for which is not
immediately obvious, we recommend that you contact your local CLARKE
Dealer.
PROBLEM
The compressor
stops and will
not start again.
he compressor
T
does not reach
the set pressure
and overheats
easily.
Compressor
does not start.
CAUTION Do not attempt any repair or adjustment if you are uncertain as
to how it should be done. If you have any queries, contact your local
CLARKE Dealer.
PROBABLE CAUSE
Bad connections.
Overload cutout
switch has tripped.
Motor windings
burnt out.
Compressor head
gasket blown or
valve broken.
Air receiver charged
9
REMEDY
Check electrical
connections.
Clean and tighten as
necessary.
witch off and wait 5
S
minutes before switching on.
Contact your local dealer
for a replacement motor.
Wait for compressor to cool
down, disassemble head
and replace any broken
components. Carefully
clean all sealing surfaces
before reassembling. If in
doubt contact your CLARKE
dealer.
Open drain cock to expel
air. Compressor should start
again when pressure
reduces to approx. 95 psi.