Alecto DVM-65 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alecto DVM-65. Alecto DVM-65 16 pagina's.

3 INSTALLATION

Power:

1. Connect one of the supplied 6V power

adaptors to the 6V DC input of the baby

unit.

2. Insert the adapter into a 230V wall socket.

Only use the supplied power adaptor with

model number S003IV0600060.

>2m

Wall-mounting:

Drill two holes next to each other in the wall

separated by a distance of 5.7cm and

insert plugs and screws. The head of the

screw should stick out of the wall for several

millimeters.

Slide the foot of the baby unit over the screws

and then press the baby unit a little down-

wards.

Tips for placement:

•

For use as a baby monitor: place the baby unit at least 2 meters

away from your baby and make sure to safely tuck away the adap-

ter cable.

•

For optimal range, it is advisable to set up the baby unit as high as

possible, free from large metal surfaces.

When used as a baby monitor: Make sure the

baby cannot reach the baby unit or wire. Place

the baby unit at least 2 meters away from the

baby and you can bundle cables that are too long

with tape or cable ties available specifically for

this purpose.