Alecto Hesdo DBX-90 Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Alecto Hesdo DBX-90. Alecto Hesdo DBX-90 7 pagina's.

Pagina afdrukken

Thank you for purchasing our DBX-90 baby monitor. Your unit has been

manufactured and checked under the strictest possible quality control

to ensure that each monitor leaves the factory in perfect condition. In

the unlikely event you find any defects or have any problem, please

contact your dealer, our branch or service center.

Please read this manual carefully to obtain maximum performance &

extended service life from the unit.

Features

• Long communication range of 800m in open space

• Hidden antenna facilitates more trendy outlook

• 8 channels + 68 digital codes (total 544 sub-channels) provide high degree of immunity

from interference

• Professional digital coding system guarantees interference free operation from

conventional PMR radios

• Baby's room temperature indication on both transmitter and receiver

• Battery status indicator and low battery alert on both transmitter and receiver

• Night light on transmitter

• Digitally adjustable microphone sensitivity on transmitter

• Selectable Hi/Lo power on transmitter to prolong battery life and minimize

radiation level

• Range check function provides an alarm when toddler moves away from parents

for over 25m.

• Audio and visual alert for out-of-range on receiver

• Audio and visual Hi/Lo temperature alert (range selectable by parents) on receiver

• Digital volume control on receiver

• Vibration alert on receiver

• LED sound level meter on receiver

• Automatic back-lighted LCD for easy viewing

• Intelligent rapid charger for receiver

WARNING

The DBX-90 baby monitor should not be regarded as a medical device. Premature babies

or those considered to be at risk should be under the supervision of your doctor or

health personnel.

Direct supervision of your baby at a regular interval by a responsible adult is strongly

recommended in addition to using the DBX-90.

POWER SUPPLY

(A) Transmitter

1. Operation from batteries

Press down the lock button and slide open the battery door in direction as shown.

Insert three pieces AA size (UM-3) alkaline batteries into the compartment. Observe

correct polarities indication. Install back the battery door and belt clip. (It may be

necessary to remove the belt clip when replacing batteries. Please refer to belt

clip removal diagram in OPERATION section).

N.B. For best performance, do not mix use old and new batteries or alkaline and

rechargeable batteries.

Operation using AC adapter

The transmitter can be operated on AC mains using the supplied 6V AC adapter.

Connect the output plug of adapter to DC jack 7 of the transmitter, make sure

the polarity is correct. The power supply from the battery will be cut off once the

adapter' s output plug is inserted into the DC jack 7 .

The communication range is longest when the transmitter is operated on AC mains.

Push until a "click"

sound is heard