Directed Directechs DB3 Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Directed Directechs DB3. Directed Directechs DB3 19 pagina's. Smart key for 2013 toyota highlander
Ook voor Directed Directechs DB3: Installatiehandleiding (20 pagina's), Installatiehandleiding (19 pagina's), Handmatig (6 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (10 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (10 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (17 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (18 pagina's)

Pagina afdrukken
Directed Directechs DB3 Installatiehandleiding

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

Key vehicles

For
Convenience-Only
programming, see next section.
1
Ensure vehicle is in a safe location and cannot move forward during programming.
The harnesses must be connected in this exact order:
  1. Connect the 14-pin.
2
  2. Connect the 12-pin.
  3. Connect the 10-pin.
When the LED turns ON solid red, proceed with the next step.
Turn the ignition ON.
3
The LED will flash green then stay green for 3 seconds and then turn OFF.
4
Turn the ignition OFF and remove the key from the ignition barrel.
You have successfully completed the module programming sequence.
10
403.FORD12 2.07 2022 Ford Transit
©2023 Directed. All rights