Blackberry ITC100-2 Installatiehandleiding - Pagina 26

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Blackberry ITC100-2. Blackberry ITC100-2 28 pagina's. Dry van, insulated trailers roll-up doors
Ook voor Blackberry ITC100-2: Installatiehandleiding (33 pagina's), Installatiehandleiding (26 pagina's), Installatiehandleiding (32 pagina's), Installatiehandleiding (33 pagina's), Installatiehandleiding (35 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (34 pagina's), Installatiehandleiding (35 pagina's), Installatiehandleiding (30 pagina's), Installatiehandleiding (35 pagina's), Gebruiksaanwijzing (33 pagina's), Installatiehandleiding (32 pagina's), Installatiehandleiding (26 pagina's), Installatiehandleiding (25 pagina's), Gebruiksaanwijzing (35 pagina's)

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

Preparing battery for shipment

If you do need to ship the battery, along with the module, please follow this procedure.

IMPORTANT: Never ship the device with the battery cable connected. Battery

must be shipped inside the module with battery cable disconnected and the

battery cable placed inside the connector nest.

1. Remove the two screws from the back of the product and separate the inner housing from

the outer housing to access the battery. Retain the screws as both screws will be required

to re-secure the inner housing to the outer housing

2. Ensure the battery cable is disconnected from the battery connector. Place the battery

cable in the battery connector nest.

3. Place the battery cover onto the module and install both screws. Module is now ready for

placement into the UN certified Dangerous Goods packaging.

Disconnect

Battery Cable

FLATBED AND HEAVY EQUIPMENT

Battery

Connector Nest