Blackberry ITF100-1 Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Blackberry ITF100-1. Blackberry ITF100-1 28 pagina's.
Ook voor Blackberry ITF100-1: Installatiehandleiding (35 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (34 pagina's), Installatiehandleiding (35 pagina's), Installatiehandleiding (30 pagina's), Installatiehandleiding (26 pagina's), Installatiehandleiding (25 pagina's), Gebruiksaanwijzing (35 pagina's)

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

types of fasteners. Please Note: Your choice of fastener will influence the size of the tools

required to create the mounting holes (i.e. drill bits) and install or remove the fasteners (i.e.

wrenches/sockets/drivers). An example of this is provided below. The actual length of the

fasteners will be determined by the thickness of your mounting surface.

IMPORTANT: The maximum fastener thread diameter

supported by this product is ¼" or M6 (6 mm).

For most secure fastening, we do not recommend

using fasteners with a diameter less than that of a ¼"

or M6 fastener.

Box Section

(+3mm wall thickness)

I-Beam / Panel Section

(with rear access)

2 self-tapping screws and washers

(3/8" head, 1/4"-14 thread, 1-1/2" length)

2 hex bolts, nuts, and 4 washers

(7/16" head, 1/4"-20 thread, 1/4"-20 nut, 2" length)

(11mm head, M6 thread, 50mm length, M6 nut)

FLATBED AND HEAVY EQUIPMENT

Drill Bit

Nut Driver/Socket/Wrench

Drill Bit

Nut Driver/Socket/Wrench

3/16" (5mm)

1/4" (6mm)