Directed Xpresskit DBALL2 Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Directed Xpresskit DBALL2. Directed Xpresskit DBALL2 16 pagina's. Ford5 remote start ready (rsr) installation
Ook voor Directed Xpresskit DBALL2: Installatiehandleiding (12 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (18 pagina's), Handmatig (14 pagina's), Installatiehandleiding (13 pagina's), Installatiehandleiding (14 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (15 pagina's), Handleiding voor installatie en snelle referentie (16 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (16 pagina's), Handmatig (19 pagina's)

Platform: DBALL2

Firmware:

CHRYSLER11 ange Extender

LED

Description

RXT error codes

Flashes

Start command received.

green x 7

Flashes

Stop command received.

green x 8

Flashes red

Start fail.

x 5

Flashes red

Stop fail.

x 6

Flashes red

RFTD disabled.

x 7

Flashes red

OEM RS disabled.

x 8

Ready

(RXT)

Installation

Troubleshooting

If the module fails to flash, it did not receive the signal.

The RXT start/stop message was received by the module, but

not executed on the vehicle.

OEM Remote Start Activation was attempted while the RFTD

feature is disabled. Make sure RXT is selected from the web

in the flashing process.

The factory remote start option is disabled. Refer to the

vehicle's owner manual to reactivate the factory remote

starter.

Rev.: 20170724

Page 13