Blackberry Radar H2 Installatiehandleiding - Pagina 14

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Blackberry Radar H2. Blackberry Radar H2 28 pagina's. Dry van, insulated trailers roll-up doors
Ook voor Blackberry Radar H2: Installatiehandleiding (33 pagina's), Installatiehandleiding (26 pagina's), Installatiehandleiding (25 pagina's), Installatiehandleiding (32 pagina's), Installatiehandleiding (30 pagina's), Installatiehandleiding (33 pagina's), Installatiehandleiding (34 pagina's), Installatiehandleiding (35 pagina's), Gebruiksaanwijzing (33 pagina's), Installatiehandleiding (32 pagina's), Installatiehandleiding (26 pagina's), Installatiehandleiding (25 pagina's)

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

FLATBED AND HEAVY EQUIPMENT

3.4.2 Installing the module on an asset

1. As indicated in Section 3.3 of this guide, record the module identifier and the asset

identifier the module will be paired with. For your convenience, you may quickly create a

record of the module and asset identifier pairings by removing the partially attached label

from the inner housing of the module and placing it on the installation worksheet, next to

the asset that will be tracked by the module.

Tip: For modules that have previously been transferred to new assets, the temporary S/N

label may no longer be in place. If this is the case, you will need to write the module

identifier (S/N) for each module on the installation worksheet.

The following sections of this guide will illustrate recommended installation methods for

various asset scenarios.