Blackberry RADAR-M ITA100-1 Installatiehandleiding - Pagina 33
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Blackberry RADAR-M ITA100-1. Blackberry RADAR-M ITA100-1 39 pagina's. Container, dry van, insulated trailers barn doors
Ook voor Blackberry RADAR-M ITA100-1: Installatiehandleiding (27 pagina's), Installatiehandleiding (36 pagina's)
Pagina afdrukken
BLACKBERRY RADAR ITA100-1 CHASSIS BRACKET INSTALLATION GUIDE 33
5 Removing BlackBerry Radar Modules
Use this procedure if you need to remove your Radar device and chassis bracket for
servicing or recycling.
For more information on obtaining service for your devices, or recycling and safe
disposal of your devices, please contact your BlackBerry representative, or visit
the following websites:
blackberry.com/support--for information on service.
blackberry.com/recycle--for information on recycling and safe disposal
of your device.
5.1 Removal Tools
Required tools to complete the removal:
Allen Key (5 mm) or
Torx Bit (T-30)
*Torx Bit + Drill offers fastest installation.
If no Torx Bit is available, an Allen Key may
be used as a substitute.
Nut Driver or
Socket Wrench with Socket*
*Nut Driver + Drill offers fastest installation.
If no Nut Driver is available, a socket wrench
and socket may be used as a substitute.
Drill
Safety Glasses
Metal Putty Knife
Large Screwdriver
(Flathead)
Wrench
*Required only if nuts and bolts
are used.