ACOPOWER X230 Beknopte handleiding - Pagina 3

Blader online of download pdf Beknopte handleiding voor {categorie_naam} ACOPOWER X230. ACOPOWER X230 4 pagina's. For lioncooler pro px30/px40/px50, double open rechargeable solar car freezer, 193wh/14.8v

Pagina afdrukken
II. X230 For LIONCooler Pro
When the X230 is plugged in the LionCooler Pro, short press (less than 1 sec)，the unit will
show "OUT1 OUT2"，the X230 will power the unit, the display on the fridge will show OUT2 and
after 30 secs the display will show a battery symbol
III. Charging for X230
A: Wall Charge: Plug in the Fridge
When the AC Adapter is connected, it will simultaneously power the fridge and charge the
X230 (until fully charged). Unplugging the ac adapter, the X230 will automatically turn on to
power the LionCooler Pro. The Max Current is 4A.
B: Charging via "DC IN": Charge the X230 Separately
Use the AC adapter with 5521 connector to charge X230 through "DC IN". Input voltage :
DC12V~Max30V. Maximum DC Charging Current : 5A
C: Solar Charging
The x230 has built-in MPPT Controller, solar efficiency is up to 98%, charge the X230 by
connecting the MC4 adapter included in the LiONCooler Packing List to the solar panel. The
max solar charging Current is 5A. Solar power can be used to simultaneously operate the
LiONCooler Pro and charge the X230.
IV. FAQ
A: X230 is plugged in the fridge, but it does not charge with the wall outlet?
1. Check if the voltage is normal (12v~16.8v). If the voltage is below 12v, this is an operation
error, please refer to the "II：X230 For LIONCooler Pro"
2. If voltage is normal, check if the battery terminal is loose and the communication terminals
between X230 and internal communication (DC OUTPUT2) of the coolers are connected
securely, open the battery cover, remove the battery to check for any dirt, leaves, articles that
prevent from secure X230 to LiON Cooler connection (disconnect the AC adapter or solar
panel before checking).
B: Plugged in the fridge, why does the X230 always turn off within 10secs?
Check if the battery terminal is loose and the communication terminals between X230 and
internal communication (DC OUTPUT2) of the coolers are connected securely, open the
battery cover, remove the battery to check for any dirt, leaves, articles that prevent from
secure X230 to LiON Cooler connection (disconnect the AC adapter or solar panel before
checking).
www.ACOPower.com
Add: 4120 Valley Blvd, Walnut, CA 91789, USA
Tel:+1-626-575 7722 Fax: +1-626-737 1140