Aleko AC1400 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aleko AC1400. Aleko AC1400 16 pagina's. Sliding gate operator

AC1400 SLIDING GATE OPERATOR

Chain Box

Make sure the ends of the guide chain are out of the chain holes on both sides of the chain

box. Remove the cover and insert the manual release key and turn counter-clockwise to

disengage the clutch. Remove the elastic band from the shaft and line up the key on the

shaft with the sprocket at the chain box. Insert the sprocket from the chain box into the

operator shaft. Place the operator on top of the base and use (4) 5/8 " (M8x15mm) socket

head cap screws to mount the chain box in to the base.

Operator

Mount the gate operator to the base using (4) 2 ¾ " (M8x70mm) #48 bolts and washers.

Make sure there is no more than 1/8" (2mm) of space between the cover and the chain box.

Check the operator and make sure it is lined up with the gate.

Gate operator

Socket head cap screw

Chain box

Operator base

Nut

Anchor bolt

Anchor

Conduit

Cable

Concrete pad

Fig.2

Fig.3