Clarke 7160030 Handleiding voor installatie en gebruik - Pagina 3
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Clarke 7160030. Clarke 7160030 13 pagina's. Fuel transfer pump
Pagina afdrukken
GENERAL SAFETY RULES
WORK AREA
1. Keep the work area clean and well lit. Cluttered and dark areas invite
accidents.
2. Do not operate power products in explosive atmospheres such as in the
presence of flammable liquids, gasses or dust. Power products create
sparks which may ignite dust or fumes.
ELECTRICAL SAFETY
1. Power products must always match the power outlet. Never modify the
plug in any way. Do not use adaptor plugs with earthed (grounded) power
tools. Correct plugs and outlets will reduce the risk of electric shock.
2. Do not expose to rain or wet conditions. Any water entering pump will
increase the risk of electric shock.
3. Do not abuse the electrical cable. Never use the cable for pulling or
unplugging the pupm. Keep the cable away from sources of heat, oil,
sharp edges or moving parts. Damaged or tangled cables increase the
risk of electric shock.
4. Use outdoor extension leads. If working outdoors, always use an approved
cable extension suitable for the power rating of this tool (see
specifications), the conductor size should also be at least the same size as
that on the machine, or larger. When using a cable reel, always unwind
the cable completely. We strongly recommend that the CFT230 pump is
connected to the mains supply via a Residual Current Device (RCD).
PUMP SAFETY
1. DO NOT use this pump where there is a danger of fire.
2. Always disconnect the pump from the power supply before carrying out
any adjustments or servicing.
3. DO NOT use to pump any liquid other than DIESEL fuel.
4. ALWAYS ensure the ON/OFF switch, mounted on the rear of the capacitor
housing (see parts lists and diagrams on page 9 & 10), is in the OFF (O)
position, before connecting to the power supply - Battery or Mains. This is
to avoid the possibility of arcing taking place, thereby reducing the risk of
fire.
5. Switch the pump OFF immediately after the task is completed.
6. Do not use the pump if the switch does not turn it on and off. Any power
product that cannot be controlled with the switch is dangerous and must
be repaired.
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
3