Alemite 8301 Servicehandleiding

Blader online of download pdf Servicehandleiding voor {categorie_naam} Alemite 8301. Alemite 8301 11 pagina's. Air-operated double diaphragm pump
Ook voor Alemite 8301: Service- en bedieningshandleiding (10 pagina's)

Pagina afdrukken

DESCRIPTION

The Model 8301 Air-Powered Diaphragm Pump is

used to transfer corrosive chemicals. The wetted

parts are polypropylene and the diaphragms are

Santoprene to resist damage from caustics, plating

liquids, brine water and other corrosive chemicals. A

silencer enclosed in the body reduces the noise. The

pump delivers a maximum capacity of fourteen

gallons per minute.

The pump has the following outstanding features:

1. Leak-Free Flange Connections

2. Side-Outlet Port Design

3. Non-Leak Manifold

4. Corrosion-Resistant Air Motor

5. Abrasion-Resistant Housing

6. Air-Valve Reset Button

7. Air Valve Requires No Lubrication

SPECIFICATIONS

Pump Ratio: .......................................................... 1:1

Air Connections:

Inlet: .................................................... 1/4" NPT (f)

Outlet: ................................................. 3/8" NPT (f)

Material Connections:

Inlet: .................................................... 1/2" NPT (f)

Outlet: ................................................. 1/2" NPT (f)

Discharge Volume per Cycle ..................... 0.025 Gal.

Maximum Size Solid: .......................................... 1/32"

Air-Supply Pressure: ................................ 20-100 PSI

Temperature Range: ................................. 32-140° F.

Net Weight: .................................................... 7.7 lbs.

670557

SERVICE INSTRUCTIONS

Diaphragm Pump

Alemite Corporation

www.alemite.com

167 Roweland Drive, Johnson City, Tennessee 37601

Figure 1: Model 8301 Diaphragm Pump

GENERAL SAFETY REQUIREMENTS

IMPORTANT: Read all instruction sheets and any

other explanatory information before beginning any

installation, operation or maintenance.

1. Check all hoses and lines for weak or damaged

condition and make sure that all connections are

secure.

NOTE: Worn or damaged parts threaten person and

property. Replace all such parts.

2. Do not use pump with any liquids not compatible

with the materials of the pump components.

3. Never exceed the maximum pressure rating of any

component in the system.

8301

SER 8301 (6-03)