Clarke DFT230 Handleiding voor bediening en onderhoud - Pagina 2
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke DFT230. Clarke DFT230 13 pagina's. 230v diesel fuel transfer pump
Pagina afdrukken
INTRODUCTION
Thank you for purchasing this CLARKE Pump.
The DFTP230 pump is a self-priming rotary vane pump equipped with a by-pass
valve and built-in filter on the inlet side. It is designed only for use with diesel
fuels, parafin and light fuel oil. It must not be used with water, petroleum fuels
or alcohol, nor if small solids are known to be in suspension.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
SPECIFICATIONS
Fluid Classification / Fluids to be used
Max. Head
Max. Flowrate (dependant upon
temperature/type of oil)
Duty Cycle
Max. Operating Temperature
Max liquid temperature
Weight (complete)
Inlet Hose Length
Outlet Hose Length
Power cable length
Motor
Input rated power
IP Rating
Thermal overload protection fitted
Please note that the details and specifications contained herein, are correct
at the time of going to print. However, CLARKE International reserve the right
to change specifications at any time without prior notice. Always consult the
pump's data plate.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Clean (parafin, light fuel oil, diesel)
6 m
56 l/min
Continuous
o
10 - 70
C
o
40
C
14 kg
2 m
2 m
2 m
230 Vac~50Hz
450 W
IP 54
Yes
2