Clarke GSE Series Handleiding voor bediening en onderhoud - Pagina 5
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke GSE Series. Clarke GSE Series 8 pagina's. Submersible pump
Pagina afdrukken
Parts Diagram
(GSE 150 &150A)
-11-
Safety Precautions
WARNING:
As with all machinery, there are certain hazards involved with their operation
and use. Exercising respect and caution will considerably lessen the risk of
personal injury. However, if normal safety precautions are overlooked or ignored,
personal injury to the operator even damage to the pump or property, may
result. For your own safety and that of others around you, please read these
safety instructions in conjunction with the operating instructions, and before using
the pump.
●
These pumps are designed to pump Water Only. NEVER use for pumping flammable
liquids or chemicals of any kind.
●
An approved Residual Current Device (RCD) MUST be used when pumping from
ponds or swimming pools.
●
Your submersible pump may ONLY be used for pumping water from a swimming
pool when there is no person or animal in the pool.
●
If the water is likely to freeze, the pump MUST
be run continuously, otherwise the
pump must be removed from the water and
stored in a frost free location.
●
If the pump is to be used where there may be
silt or mud etc (e.g., garden ponds),
keep the pump clear of any sediment by
standing it on a platform or brick or
suspending from a rope attached to the handle.
● ● ● ● ●
NEVER run the pump dry.
● ● ● ● ●
NEVER run the pump with the body exposed for
longer than 10 minutes.
● ● ● ● ●
NEVER install the pump on sand, silt, mud or
ground that is likely to shift.
● ● ● ● ●
NEVER Lift the pump by the mains cable, or the float switch cable.
● ● ● ● ●
ALWAYS use the handle, with rope or chain attached when lifting the pump.
● ● ● ● ●
ALWAYS disconnect the pump from the electrical supply before placing it into, or
removing from the water, and before any cleaning or maintenance of the pump.
-4-