Alemite 7344 Servicehandleiding - Pagina 6

Blader online of download pdf Servicehandleiding voor {categorie_naam} Alemite 7344. Alemite 7344 8 pagina's. High capacity twin hose reel

SER 7343

Installation

WARNING

Do not exceed the lowest pressure rating of

any component in the system.

Ensure all components are in operable condition.

Replace any suspect parts prior to operation.

Hold the delivery hose securely until the reel is securely

latched or fully retracted. Uncontrolled retraction can

result in personal injury.

1. Connect the delivery hose securely to 90 ° Unions (22).

HINT: Orient the hose to allow its natural curve

to match the Sheave. This reduces torque load on

Power Spring Assembly (26).

2. Secure the delivery hose to the Sheave Assembly with

U-Bolts (14), Washers (15) and Wing Nuts (16).

IMPORTANT: Allow some slack on the hose

between the U-Bolts and the 90 ° Unions.

Figure 4 High Capacity Twin Hose Reel Model 7343 and 7344 - Section View

Revision (11-08)

1-800-548-1191-http://[email protected]

3. Rotate the Sheave Assembly to wrap the hose completely

onto the reel.

• The clicking sound is the power spring bypassing the cam

on Spring Arbor (27).

Setting Spring Tension

To adjust tension on the power spring:

4. Rotate the Sheave Assembly in the opposite direction 5

turns.

• This sets the power spring tension.

IMPORTANT: When the hose is fully extended

from the reel, the power spring should be a mini-

mum of 1/2 turn from a fully wound condition.

5. Allow the reel to latch.

6. Feed the end of the delivery hose through the Hose Guide

Assembly.

7. Install and secure the hose stop.

8. Mount the reel assembly with the appropriate hardware as

required.

9. Adjust the hose stop to the desired position.

High Capacity Twin Hose Reel

Alemite, LLC